Inorganic coatings are the most reliable

The rapid development of the contemporary world economy and industrialization has led to the rapid deterioration of the earth's environment, serious pollution threatens the living space of mankind. "Green", "environmental protection" has always been a topic of great importance to people, but also the direction of the development of coatings.

For a long time, organic coatings have been widely used for their good decorative properties, variety and low price. However, since the main raw materials of organic architectural coatings come from natural resources such as coal, oil, natural gas, etc., a large number of by-products and volatile solvents as well as residual monomers will be produced during the processing, resulting in environmental pollution and waste of resources. Not only that, organic coatings coated on the surface of the wall, and the external wall to form a coating film, after a period of time, the wall coating film may appear hollow drums, blistering or even peeling off.

And inorganic coatings have good air permeability, anti-pollution and excellent comprehensive environmental performance. With the increasingly strict requirements on the performance of architectural coatings and environmental protection, both domestic and foreign countries pay great attention to the performance research, production and application of inorganic coatings, and have done a lot of work in these areas.

What is inorganic coating?

Inorganic coatings, also known as fully inorganic mineral coatings, are widely used in construction, painting and other areas of daily life. It was used for painting and architectural decoration by the people of western China thousands of years ago and is still well preserved today. This kind of paint can penetrate into the mineral base and synthesize with its surface. It can beautify the building, improve the life of the building, and has superb protection for the building. The quality of the coating is so superior that it cannot be compared with other coatings.

This kind of coating is---all inorganic silicate mineral coating. Located in Germany and Switzerland, several classical buildings outside the wall of the use of mineral coatings, so far 100 years of color is still bright as new. Inorganic mineral coatings can be seen in the flame retardant, weatherability is extraordinary!

What are the advantages of inorganic coatings?

1, health and environmental protection - from nature inorganic coatings of environmental protection as in the "from the people, with the people", from nature, such as silica sol, silicates and other coating materials, its main raw materials from the time of the ore, natural substances are very rich, the production of inorganic paints on the way to non-toxic, odorless, colorless, environmentally friendly! Inorganic coatings are non-toxic, no odor, no coloring, environmentally friendly and harmless to human health. Inorganic coatings can quickly react with iron atoms on the surface of the steel structure to generate inorganic polymer anticorrosive coating with physical and chemical double protection, firmly bonded with the substrate through chemical bonds, no pollution of the environment, long service life, anticorrosive properties to reach the international advanced level, and is in line with the requirements of environmental protection of high-tech replacement products.

2、Anti-bacterial and anti-mold

Inorganic coatings with alkali properties, the advantages of the interior wall, can be antibacterial and anti-mold, can resist Escherichia coli, Staphylococcus aureus, Candida albicans and other strains of bacteria, the indoor environment to play a certain antimicrobial effect, the use of inorganic coatings can be effectively isolated from the outside world of the viruses and bacteria, is the home of the security guards, a better guardian of our health. Advantages of the external wall, can kill bacteria and moss spores, because it is a natural ingredient (does not contain nutrients) so moss, algae microbacteria can not grow. Especially after the epidemic, antibacterial anti-mold is a very important thing, guarding to protect their health. Inorganic coatings with alkali properties, more suitable for use in the same alkaline cement, gray sand and other grass-roots level, penetration of permanent and mineral wall (including lime cover) chemical combination and can penetrate into the wall 0.5-2mm, the formation of waterproof, acid-resistant silica fossilized stone surface layer, penetration of the bonding is strong. Furthermore, it has the same expansion and contraction coefficient as the mineral wall surface, so it can avoid chapping and cracking due to heat.

3, water-resistant and breathable - good anti-fouling performance inorganic coatings with water resistance and strong respiratory, similar to the human skin, water can not go into the sweat can be discharged, so that the internal moisture of the building walls naturally evaporate outward, keep dry. Especially in the south of the return to the south of the weather, everywhere everywhere is wet, and water-resistant and breathable just to meet this point, the wall is dry, does not produce static electricity to attract dust and build up into a dirt situation, so the wall will not hang gray, there are anti-fouling properties, a triple whammy. At the same time with the filtering effect of alkali substances, can prevent the coating bubbles, produce heat burst and scaling and flaking and post construction by alkali pollution and other shortcomings.

4, class A fire - temperature 1300 ℃ does not burn inorganic coatings because of the characteristics of inorganic substances, its temperature resistance is particularly good, not only in the 1300 ℃ of high temperature will not burn, but also flame retardant, can prevent casualties and the wall itself is damaged.

5, weather resistance - to avoid the phenomenon of spitting white color fading phenomenon due to long-term exposure to the outside world of different environmental factors, perennial wind and rain, snow and frost damage, and inorganic coatings weather resistance to avoid the birth of moss, "spitting white", fading, build up of dirt, and even shedding, and even fading of these phenomena. Even fading of these phenomena. Furthermore, inorganic coatings are alkaline, so they are not attacked by wall surfaces, and will not cause staining, chalking and peeling, and they are not even affected by acid rain and automobile exhaust, industrial pollution and other acid rain attacks, so inorganic coatings are also a good choice of decorative materials for exterior walls.

Inorganic coatings are made from nature and do not contain chemical raw materials, so inorganic coatings have stable performance and do not react chemically, so they do not volatilize toxic gases. Inorganic paint after special oxidation modification treatment, it can completely prevent the radiation of the sub appearance, and for natural pigments, color has a unique super weather resistance, so the paint color is long-lasting and not fade, indoor decorative performance is more advantageous.

It can be seen that, compared with traditional coatings, inorganic coatings have great advantages, and become the first choice of interior and exterior wall decorative materials, is just around the corner.